STAY CONNECTED AND SIGNUP TO RECEIVE INSIGHT updates
‘Productivity isn’t everything,’ wrote economist Paul Krugman, ‘but, in the long run, it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability to raise its output per worker.’
Productivity is simply a ratio of outputs to inputs. We would all like to learn how to get the maximum output for the least amount of input. Productivity improvement is not merely cutting costs, as some corporate toe-cutters would have you believe. There is both a numerator and a denominator in the equation. You can increase the numerator, decrease the denominator or do some combination of the two.
[Listen to audio version, read by David Hodes]
Usually, the impact of increasing the numerator will far outweigh a reduction in the denominator. But in a world where we have finite planetary resources, does it make sense to recklessly pursue ever more GDP without paying attention to the need to be frugal with our use of the resources required to create it? What is our response when those resources contribute so massively to greenhouse gas emissions which turn the metaphor of rising tides lifting all ships from a paean to productivity into an environmental alarm signal?
Thus, even with the wicked problem of climate change, improvements in productivity are going to be how we make progress and give ourselves at least a fighting chance to continue to prosper on all this good earth. How else would we be able to go from the current global renewable energy consumption of around 5% of the total (80% fossil fuels, 10% biofuels and 5% nuclear making up the balance) to ultimately replacing fossil fuels? How will we be able to square the circle of an increasingly prosperous developing world demanding access to the kind of life we in the OECD take for granted, tied as it is to ever increasing energy requirements? The record shows that over the last fifty years we have indeed been getting more productive in terms of the carbon intensity per dollar of GDP. But we have also produced more GDP and therefore more greenhouse gases.
“Systemically improving productivity is a necessary condition of our species’ ability to continue to make progress on the planet we call home”
I am not like the misanthropists who suggest that the way out is to depopulate the planet. I often wonder if those who advocate such a solution would be willing to go first? As for those who exploit every convenience of our modern age to rage against the machine and then call for an extinction rebellion to avoid a climate Armageddon, I wonder what their response would be to an hours-long power failure on the way home from a rally, halting their trains and silencing their phones.
At heart, I am a practical man, and whether the measures we need to take are about mitigation or innovation, I believe that systemically improving productivity is a necessary condition of our species’ ability to continue to make progress on the planet we call home.
My epiphany about the power of productivity occurred when I first took the Theory of Constraints (TOC) out for a drive. I was the Managing Director of a national commercial refrigeration company and, through the use of Critical Chain Project Management, my team took 26 days out of a 71-day project. I was astounded that I then had 26 days of virtually free labour available, as I had already costed their full recovery, and some profit, into the winning bid on that contract. My immediate thought was that I could sell a job that used 26 days of the whole crew’s labour at their standard rate and the only cost would be the materials. The rest would be pure profit. Productivity improvement had already paid for the workers.
My mind searched for an analogy to explain to people what I had discovered. I told them it was as if the general public was used to taking twenty-four hours to fly from Johannesburg to London (I was living in Jo’burg at the time), and someone had come up with an invention that would replace a turboprop with a jet engine, the effect of which would be to halve the travel time between the two cities. Why would anyone ever want to travel in a slow turboprop again?
More than twenty years later, there has been no dimming of my enthusiasm for the power of innovations in productivity to change the world for good. Much of this year, I have been working in the aluminium industry. It is an energy-intensive business and also fundamental to the wellbeing of the region to which it belongs. Every day, over 3,000 people go to work at one of the operations of a global player in the aluminium market. Many more than those 3,000 have an indirect dependency on the business through the provision of goods and services to the company and its employees. The corporation of which it is a part has committed to being carbon neutral by 2050. Even then, the investment community marks down their shares because of the centrality of energy to the viability of the business and the environmental challenges this brings.
There can be no doubt that the more productive the business, the more profitable it will be. But what are the dimensions of productivity? How might we measure it? I like to look at productivity in two fundamental ways, using the basic building blocks of the constraint accounting framework.
I start with the assumption that all investors are fundamentally interested in maximising the return on their investment, and we formulate that in TOC in the following way:

ROI = return on investment
T = throughput, or sales less truly variable costs (referred to by cost accountants as contribution margin)
OE = operating expense, defined as labour plus overheads
I = investment, defined as equipment, fixtures, buildings, etc, that the system owns as well as inventory in the forms of raw materials, work-in-process and finished goods
Since Throughput less Operating Expense is a measure of the profit of a business, I call the ratio of Throughput to Operating Expense (T:OE) the operating productivity. It provides the answer to the question: what margin am I making for every dollar it costs me to open the door? The ratio of Throughput to Investment (T:I) is the capital productivity and answers the question: what margin am I making for every dollar I have invested in the business?
Given these formulations, what levers do we have to increase productivity?
More revenue: There’s an old saying that sales are vanity, profit is sanity and cash is reality. More income can produce more profit if the combination of margin and operating expense stay the same. In some cases, more revenue could mean knocking out or weakening a competitor by taking sales away from them. And, of course, we must also think about the effect of pricing decisions on volume and margins.
Faster speed to market: The faster you can get a product to market, the more likely you will spend less doing so. You will also generate a first-mover advantage, and have a head start in being able to iterate the next improvement to stay ahead of your competitors.
Shorter turn-times: the shorter your turn-times, from order through to fulfilment, the less inventory there is in the supply chain, the more responsive you are to actual demand and the more willing your customers will be to pay a pricing premium. Your capital productivity will also improve as a result of having less inventory in the system.
Dependable due dates: The more reliable you are as a provider of goods and services, the less your customers have to make ‘just-in-case’ contingencies and the more likely they would be open to paying a price premium.
Higher margins: Being able to sell at higher prices, because you have a demonstrable value benefit for your customers, means you will achieve higher margins, all else being equal. Furthermore, if your processes are increasingly predictable, your suppliers can more readily find ways to reduce their costs and pass the savings into your margins.
Lower OPEX: The more productive your workforce, the fewer people required to produce your product or service offering.
Lower unit cost: The more volume you have running through your organisation—assuming you can keep your operating expense either the same or increasing at a rate that is slower than the increase in volume—the lower the unit cost of your sales.
Less inventory: The faster your speed to market and turnaround times, the less inventory you have in your pipeline. The less inventory, the lower the working capital, the better the return on shareholder funds.
Less work in process: If you’re completing your work ever faster, there will be less work in process, and more of your labour and other inputs will become cash sooner.
Effective CAPEX: The quicker you are in planning and executing your projects, the less cash they burn and the quicker they deliver the value contained in their business case. Also, you can redeploy your resources sooner to realise the value of the next big idea. Getting the most from your existing assets means deferring CAPEX until it is unarguably necessary.
Better quality: Better understanding of just-on-quality requirements means less gold-plating on the one hand and fewer rejects on the other. Thus, besides reducing operating expense through wasted effort, your reputation is enhanced. Your customer has the chance of delight with every encounter with your product or service.
Less rework: Doing rework for a product or service that should have been right the first time is costly and unproductive. Reduce your rework and you improve ROI.
Higher engagement: If the organisation is scoring goals, and the work you do to get there follows the principles of Just Work, your people will naturally feel more engaged. You will likely be making more money and will be better placed to invest in their potential and willingness to learn and grow.
More innovation: More engaged people have more energy and are more willing to give of themselves and their capacity for discretionary effort. Furthermore, high engagement is an indicator of a healthy culture, where competition and collaboration find an energising balance, acting as a propellant of innovation.
Competitive ROI: Not every industry can produce a player whose ROI outperforms all other players in all other industries. There are structural reasons why specific industries produce lower returns than others. Thus one mustn’t look to demonstrate the highest ROI overall, but one that is competitive to the discerning portfolio manager. Productivity that is higher than your sectoral competitors will deliver a higher ROI, and thus a premium share price.
Applying TOC across the four core capabilities of Asset Constraint Management gives you the opportunity to design business outcomes that you would otherwise think were neither reasonable or possible. Every one of the attributes of productivity improvement listed above is improved by learning how to know the whole but focus on the constraint. Theory of Constraints is the tide that can lift all ships.
The means do exist to create a step-change in productivity and hence maximise the net present value of your assets. Imagine what good would come of this innovation in productivity if you became the dynamo, energising your team and generating outsized results. What hard problems could you solve? What benefits could you bring to the world and the community you serve?
____________________________
What’s next?
The change from standard thinking to Theory of Constraints (TOC) is both profound and exhilarating. To make it both fun and memorable, we use a business simulation we call The Right Stuff Workshop.
We’d love to run it with you. To learn more:
____________________________

[Background photo: Low tide by Robin Spielmann on Unsplash]
“Know the whole, focus on the constraint.”
____________________________
The Shortest Path From Mineral Potential to the Highest Sustainable Cash Flow
A mining investment earns its return through the conversion of mineral potential into dependable cash flow. Every uncertainty, delay and misplaced commitment along that journey affects how much capital is required, how long it remains exposed and what the investment ultimately delivers.
For those who allocate capital, the challenge extends beyond identifying an attractive resource. The acquisition thesis depends on connected decisions across geology, studies, approvals, construction, commissioning, production and closure. Each decision can strengthen the investment case or quietly erode it.
An AI enabled Mining and Metals Operating System connects evidence, reasoning, accountability and execution across that journey. Systems Thinking provides the whole asset perspective. The Theory of Constraints directs attention towards the factor governing value today. AI helps people interpret information, examine alternatives and coordinate the work required to change the outcome.
“Where is the greatest gap between the value this asset could credibly create and the value it is currently on course to deliver?”
The operating model below brings these ideas together: human accountability above, the life of mine across the centre, and integrated knowledge and reasoning supporting every stage.

An operating system needs a clear management accountability hierarchy. Purpose and levels of work define the decisions people must make, the authority they require and the capability needed to carry their responsibilities.
A supervisor protecting today’s production, a project director preparing commissioning and a board allocating development capital face different levels of complexity and different time horizons. Each needs information appropriate to the work, clear decision rights and a reliable route for escalation.
AI makes this clarity more important. Recommendations must have accountable human owners, particularly where commitments cross the boundaries between investors, asset owners, contractors and service providers.
For investors, this provides a practical test of execution capability: can the organisation show who owns each assumption in the investment thesis, who can authorise action and how unresolved issues reach the right decision maker?
Exploration creates value when it resolves uncertainty that changes a worthwhile decision. More data becomes useful when it improves confidence about what is present, where it lies and what further work is justified.
AI can help connect geological reports, assay results, drilling records, geophysical observations and three dimensional interpretations. Shared terminology and traceable relationships allow teams to compare evidence, expose inconsistencies and distinguish observations from interpretations.
The investor’s question is which uncertainty governs the next commitment. A targeted investigation may change the development route, support further drilling or reveal that the opportunity cannot yet justify additional capital.
New sensing and interpretation methods must earn confidence through appropriate validation. The objective is a better sequence of learning and commitment, with uncertainty visible throughout.
Studies turn a resource opportunity into choices about mine planning, processing routes, infrastructure, scale and development sequence. Those choices establish much of the future cost, risk and operating flexibility of the asset.
An integrated operating system connects technical narratives, economic models, engineering constraints and spatial representations. Teams can examine whether assumptions agree across disciplines and whether the preferred option remains attractive under plausible changes in conditions.
Approvals, water, power, logistics and workforce requirements belong in this comparison from the outset. Internal experience and relevant external benchmarks can challenge optimistic estimates.
For investors, the benefit is a clearer explanation of why an option deserves funding, what could defeat it and which evidence should be obtained before the next irreversible commitment.
“The most valuable early action may be the one that changes the next capital decision.”
Once capital is committed, the central question becomes whether the project remains on course to deliver its business case. Progress percentages alone cannot answer it.
Engineering maturity, procurement, construction sequencing, approvals and commissioning readiness must be considered together. Individually manageable deviations can combine into a material threat to first production and cash flow.
AI supported delivery intelligence can connect schedules, costs, risks and physical evidence, helping teams identify contradictions and emerging dependencies between formal review gates.
Management can then assess intervention options while choices remain available. A useful assurance process explains what changed, why it matters, who must act and when. Success appears in improved delivery confidence, controlled capital exposure and a credible route into operation.
The economic performance of a mine depends on how extraction, material movement and processing work together. Improving one activity can consume capital without improving the whole.
If processing capacity governs saleable output, increasing mining volumes may simply build stockpiles and working capital. If feed variability constrains recovery, additional plant availability may deliver less benefit than expected.
Connecting mine plans, ore characteristics, plant conditions and production results helps teams investigate these relationships. AI can support the comparison of operating choices, while physical models and simulation help test their consequences.
The discipline is to find the constraint, optimise for it, collaborate around it, uplift it and start again. The measure is the resulting contribution to cash generation, with safety, quality and environmental obligations respected.
Maintenance creates value through its effect on the productive capability of the system. Equipment critical to the governing constraint deserves particular attention because its failure can interrupt the entire flow of output.
An integrated operating system connects procedures, equipment histories, sensor readings, work orders, spare parts and operating conditions. Consistent asset identities and failure classifications help teams interpret information across systems.
AI can support prioritisation and flag emerging patterns for investigation. Simulation can also help operators and maintainers rehearse commissioning, abnormal conditions and recovery from disruption.
For investors, the question is whether this changes reliability and economics: more dependable throughput, better recovery, fewer damaging interruptions and a sustainable balance between production demands and asset capability.
Tailings facilities connect engineering performance, environmental responsibility, operational continuity and long term liability. Their condition and management belong within the investment case.
Inspection reports, monitoring data, risk thresholds, drawings and terrain models can be brought into a shared context. AI can help identify inconsistent records, surface changes requiring attention and connect actions with accountable owners.
Qualified professionals must interpret the evidence and authorise decisions. Traceability matters: the organisation should be able to show what was observed, how it was assessed and what followed.
Where reprocessing or resource recovery is contemplated, the opportunity requires its own technical and economic evidence. Potential value must be considered alongside remediation obligations, additional capital and the consequences of disturbing existing facilities.
Closure decisions begin long before production ends. Land disturbance, infrastructure choices, water management and waste handling can create obligations that persist beyond an investor’s ownership period.
Connecting closure plans with operating and capital decisions helps reveal those consequences earlier. Progressive rehabilitation can be evaluated alongside production needs, while evolving assumptions remain visible in forecasts and decision records.
AI can support the organisation of obligations, evidence and dependencies across the asset’s life. Credible cost estimates and technical judgments remain essential.
For investors, better closure visibility informs valuation, capital planning and exit readiness. A future buyer needs confidence that liabilities are understood, supported by evidence and reflected in the economics.
Supporting every stage is the ability to reason across verbal, numeric, logical and spatial information. Reports explain intent; models quantify consequences; rules establish conditions; drawings and three dimensional models reveal physical relationships.
These sources need shared meaning, or semantics, and explicit relationships, or ontology, within the organisation and across customers and service providers. Otherwise, apparently connected systems can continue to describe different realities.
For example, “ready for commissioning” should connect to agreed requirements for construction completion, inspection, training and operational acceptance.
AI agents can help trace dependencies, identify conflicting assumptions and prepare options. The operating system then connects decisions to owners, scheduled work and completion evidence. Learning from the result updates the next decision.
“Enterprise value is the product. Capabilities are the machinery.”
Begin with one material value problem. Establish the economic baseline and current trajectory. Identify the governing constraint, material uncertainties and credible intervention options. Agree accountable owners, decision gates and a practical action pathway.
Measure the result through time to cash, throughput, recovery, capital exposure, operating cost and liability. Translate changes into the investment model, including implementation costs and avoiding double counting.
An AI enabled Mining and Metals Operating System earns its place when it helps change the asset’s economic trajectory. For investors, the opportunity is a repeatable capability for converting mineral potential into realised value.
Concept validation
A concept can look convincing in a presentation and still make an important task harder. A patient may misunderstand an indicator. A clinician may need information the design does not provide. A promising workflow may depend on support unavailable in the intended setting.
These problems become more expensive when the organization discovers them after committing to architecture, tooling or a launch plan.
We must ask how effectively concepts are validated before significant resources are committed. Patient Centered Design treats this as a learning discipline: turn ideas into testable solutions rapidly using low fidelity prototyping, put them in front of relevant users and gather evidence about whether they improve the outcomes that matter.
“A convincing presentation shows what the team hopes will happen. A useful test reveals what people actually do.”
A prototype without a learning objective can generate interesting comments while leaving the key decision unresolved. Start by identifying what must be true for the concept to succeed.
Does the patient intuitively understand the required action without explanation? Can the professional recognize when the result is ready to use? Does the proposed approach fit the work surrounding the task? Will people take meaningful steps toward adoption?
State the assumption and the evidence needed to assess it. Agree what would support proceeding, what would require revision and what could make the concept unviable. Gather quantitative data along with qualitative verbal feedback.
Prioritize questions with substantial consequences for the investment. An attractive enclosure deserves less attention than an unresolved issue that could prevent safe or practical use of the whole solution.
A picture is worth a thousand words. A simple user experience prototype is worth a thousand pictures. Choose artifacts that maximize learning with the least effort. The appropriate artifact depends on what the team needs to discover.
A sketch may help users explain how they interpret a proposed interaction. A physical mock-up may expose handling difficulties. A simulated interface can support a sequence of tasks. A more complete prototype may be necessary to examine timing, feedback or combined interactions.
Build enough realism to test the assumption accurately. Excessive detail can consume resources without improving the evidence, while insufficient fidelity can conceal the issue being investigated.
Make limitations clear to participants and observers. A manually simulated function may help test an experience, but it does not establish that the technology can deliver that function reliably.
Patients and healthcare professionals can differ in experience, confidence, physical ability, responsibilities, and access to support. Those differences influence whether the concept helps them complete the job.
Define the participants and contexts relevant to the test. Include people whose circumstances could expose difficulties the development team has overlooked.
A familiar expert may work around a confusing interface that challenges a new user. A clinician from a highly supported center may assume resources unavailable elsewhere. Research needs to reveal these dependencies.
Match the study to its purpose. Exploratory sessions can identify problems and guide iteration. They do not automatically establish population-wide performance or replace the evidence required for later design validation.
An Experience Café gives participants a structured opportunity to encounter concepts and talk about their experience. Its value comes from the quality of the scenario, observation and follow-up questions.
Set up situations that reflect what the person is trying to accomplish. Let participants interact with the artifact rather than rely solely on a demonstration by its designer. Build rough and rapid.
Assign roles to facilitators and observers. Agree how comments, actions and difficulties will be captured. Keep the session focused on learning rather than defending the proposed solution. Hold a conversation around the prototype. “Can you show me how you would use this?” “Tell me what you are thinking here.”
Ask participants to explain what they believe is happening and what they would do next. Observe where the concept supports that understanding and where they hesitate, improvise or seek help.
A facilitator can unintentionally make a weak concept appear successful by explaining each step or supplying missing information.
Use neutral prompts and allow participants to reveal their interpretation. When assistance is necessary, record it along with the point at which the person became stuck.
Follow observations with questions about purpose and reasoning. What did the participant expect? Which information did they look for? Why did they choose that action?
Separate a preference from evidence about task performance. “I like this one” may reflect appearance or familiarity. Successful completion, appropriate interpretation and manageable effort provide a stronger basis for assessing whether the concept addresses the need.
“Every explanation the facilitator must supply is a question about what the design expects the user to know.”
The product interaction belongs within a wider job. Test preparation, readiness, execution, monitoring and what follows, wherever these activities affect the concept’s value.
A device may work well once configured while setup introduces avoidable complexity. A result may be easy to view while the professional still needs to transfer it manually before acting.
Include relevant dependencies on caregivers, staff, information and other systems. Investigate whether the concept reduces burden for one participant by increasing it for another.
Use realistic scenarios appropriate to the development stage. Important exceptions and recovery steps deserve attention alongside routine success. An incomplete or interrupted task can reveal weaknesses that a carefully guided demonstration leaves hidden.
Ease of use involves what a person must notice, understand, remember, decide and physically do. A tidy interface can still demand substantial mental effort.
Human performance depends on limited attention, working memory and feedback. Examine how the concept supports those processes during a task.
Does it make the relevant information perceptible? Can the user understand its meaning? Is the next action clear? Can they recognize whether that action succeeded?
Look for unnecessary steps, demands to remember information across screens and alerts that interrupt without helping a decision. The best change may simplify a sequence or improve feedback rather than add another feature. Confirm its effect through observation and appropriate measures.
Choose measures that reflect the priority outcome and the study’s purpose. These may include completion time, errors, requests for help, repeated actions or failure to notice important information.
Subjective workload measures can complement observed performance. NASA Task Load Index can help structure participants’ assessment of workload, while PURE provides an expert assessment of the effort required to complete tasks. Satisfaction ratings on a Likert scale can be used to compare concepts directly with each other and a baseline solution.
Do not treat one measure as a complete account of usability. Faster completion may accompany misunderstanding. A participant may complete the task correctly while reporting effort that makes repeated use impractical.
Interpret results together and examine the conditions under which they occurred. Record the limitations so decision makers understand what the test has established.
Pretotyping examines whether people take meaningful action toward using or adopting an idea before the full solution exists. It addresses a different question from whether a working product can be engineered.
A clearly described concept, service simulation or expression-of-interest process may provide evidence about engagement. The strength of that evidence depends on the action required and the conditions surrounding it.
A click demonstrates less commitment than a substantive implementation conversation. Neither establishes clinical efficacy or successful device use.
For medical concepts, keep representations accurate and make the test status clear. Interpret behavioral evidence alongside clinical appropriateness, access requirements and the responsibilities of the people making adoption decisions. Interest alone cannot establish that the solution should proceed unchanged, particularly when workflows in the clinical setting are involved.
A value proposition explains which customer the concept serves, the job it supports and the difficulties it intends to reduce. It should connect directly with the outcomes identified through research.
Compare that proposition with the evidence from concept tests. Did participants experience the intended benefit? Did another difficulty become more important? Did the concept require assumptions that the intended setting cannot support? Did the concept do something better than a competitor’s current solution?
Capture both positive and negative findings. Use them to revise the concept, the proposition or the team’s understanding of the need.
Then test the important changes. Iteration should answer a question left open by the previous round. Repeating sessions without changing the artifact or research objective can accumulate comments while leaving uncertainty untouched.
Early concept validation supports decisions about direction and investment. It does not establish all the evidence needed for a finished medical device.
Technical performance, reliability, clinical benefit and intended-use safety require appropriate subsequent work. A convincing simulated experience may depend on functions the team has not yet demonstrated.
Make these boundaries visible in the decision record. State who participated, what was tested, the conditions, findings and unresolved issues. Explain how those findings affect the next commitment.
Overall, having a “winning concept” in hand, backed by user Experience Café data along with user needs in the form of outcome statements formally structured with a direction of improvement and unit of measure, sets a development team up for success. The outcome statement user needs provide a solid foundation for the design history file.
Rapid prototype experience testing gives the team answers to key decisions and sets a target to pursue early on. This results in faster development cycles, more robust regulatory submissions, and better returns on investment spending.
A Value Management Office can connect this learning with resources and stage decisions. Testing should help the organization commit at a pace justified by evidence and concentrate effort on the uncertainties that govern progress.
“Early validation creates value when it changes the concept or the commitment before an unresolved assumption becomes expensive.”
Examine one proposed investment. Which assumption could defeat the concept, and what is the least costly credible way to test it?
Prepare an appropriate artifact, involve representative users and observe meaningful tasks. Review the evidence, revise the concept and record the next learning decision. This gives Patient Centered Design a practical route toward solutions people can successfully use and organizations can responsibly develop.
Discover better ways to do better work.
We alternate our own actionable articles with three relevant links from other authorities.
We’ll only use your email address for this newsletter. No sales callsDiscover better ways to do better work.
We alternate our own actionable articles with three relevant links from other authorities.
We’ll only use your email address for this newsletter. No sales calls